M249, Drill and Ceremonies

The M249 is carried at Sling Arms in the same manner as the M16. All individual drill movements (as applicable) are executed while at Sling Arms. When At Ease or Rest is
commanded (from Parade Rest), the Soldier unslings the weapon and places the butt of the weapon on the marching surface beside his right foot. The only manual of arms movements that may be executed are Present Arms (Present Arms at Sling Arms), Unsling Arms, Inspection Arms, and Ready Port Arms. (Inspection Arms and Ready Port Arms may only be executed from the Order Arms position.) During all other manual of arms movements, the Soldier remains at Sling Arms.

a. Inspection Arms with the M249. The command for this movement is Inspection, ARMS.

b. On the command of execution ARMS, execute Port Arms from Order Arms in two counts. On count three, grasp the pistol grip with the right hand and reach under the weapon
with the left hand and grasp the cocking handle (the back of the hand faces toward the muzzle). On count four, sharply push the cocking handle rearward so that the bolt is locked
to the rear. On count five, sharply return the cocking handle to its original position. On count six, bring the left hand between the body and weapon, unlock the feed tray cover (with the thumb and forefinger), and raise the feed tray cover. On count seven, grasp the feed tray with the left hand, open the feed tray and feed tray cover as far as possible, and observe the chamber. On count eight, regrasp the handguard with the left hand and the comb of the stock with the right hand, and come to Inspection Arms (Figure E-2).

c. Ready, Port ARMS is the only command that is given from Inspection Arms. On the command Ready, grasp the pistol grip with the right hand and the feed tray cover with the
left hand and close the feed tray cover. On the command Port, grasp the cocking handle with the left hand and sharply push the cocking handle to its most rearward position. On the command ARMS, pull the trigger with the right forefinger and ride the bolt forward with the left hand, then return to the Port Arms position (Figure E-2).

Figure E-2

Stack Arms

This is great preparation for Basic Training. Right out of the Drill and Ceremonies Manual.

Execute Stack Arms using the following procedures:

a. Stack Arms is executed from Order Arms only. It may be executed while at Normal Interval in a line (squad) or a column formation. Stack Arms is not a precise movement; however, it is executed in a military manner.

b. The leader designates the stackmen by numbers (2-5-8) when in a line formation, orby squad (second or third) when in a column formation. After the stackmen have been designated, the leader then commands Prepare, SLINGS.

c. On the command SLINGS, each stackman places the butt of his rifle on his right hip and cradles it in the crook of his right arm. He then adjusts the sling keeper to form a 2-inch loop next to the upper sling swivel. As soon as he has prepared the loop, he returns to Order Arms.

d. When all stackmen have returned to Order Arms, the leader commands Stack, ARMS. On the command ARMS, each stackman places his rifle directly in front of and centered on his body with the sling facing to the front. The heel of the rifle butt is on the marching surface on line with the toes of his shoes. He grasps the rifle by the handguard with his left hand. The first two fingers of the left hand hold the inner part of the loop against the rifle. He reaches across the front of the rifle with the right hand, grasps the outer part of the loop, and holds it open for the insertion of the other rifles. He holds the rifle vertical at all
times (1, Figure C-5, page C-6).

e. On the command ARMS, the men to the left and right of the stackman perform the following movements simultaneously:

(1) The man on the stackman’s left raises and centers his rifle in front of his body so that his right hand is shoulder high and the rifle is about 4 inches from his chest, with the sling to the front. He then grasps the rifle with his left hand at the small of the stock and lowers both arms, holding the weapon in a horizontal position (1, Figure C-5, page C-6).

(2) The man on the stackman’s right raises and centers his rifle, wrist shoulder high, with the sling facing the front. He then grasps the rifle with his left hand directly below his
right hand, and, in the most convenient manner, grasps the rifle with the right hand at the small of the stock. He then lowers both arms, holding the rifle stock. He then lowers both arms, holding the rifle in a horizontal position (1, Figure C-5, page C-6).

(3) As soon as both men have completed these movements, each moves the foot nearest the stackman 18 inches (Half Left or Right) toward the stackman. In a continuing motion, the man on the stackman’s left inserts the muzzle of his rifle into the loop held by the stackman until the bayonet stud protrudes past the far end of the loop (2, Figure C-5, page
C-6). He holds his rifle in that position until the man on the stackman’s right inserts the muzzle of his rifle through the loop in the same manner and above the muzzle of the rifle of
the left man.

f. When both rifles have been inserted into the loop, the men on each side of the stackman swing the butts of their rifles out and down to the marching surface until the stack is tight with the (two) rifle butts on line and about 2 feet from the baseline.

g. After necessary adjustments have been made, the three men come to Attention (3, Figure C-5).

h. Extra rifles are passed to the nearest stack on the right. As each rifle is passed, it is grasped at the upper part of the handguard with the right hand. Then, with the rifle held
vertical, it is passed with fully extended arm to the right front. The man on the right grasps the rifle at the balance with his left hand, brings the rifle to the center of his body, and regrasps it at the upper part of the handguard with his right hand. This action continues until the stackman receives the rifle and places it on the stack with his right hand as nearly vertical as possible. He places the rifles on the stack with the slings away from the stack (if the second squad is the stack squad, extra rifles are passed to the left).

Section I. MANUAL OF ARMS—M16-SERIES RIFLE

This section contains procedures for executing the manual of arms with the M16-series rifle (Figure 5-1) in conjunction with individual and unit drill movements.

The following are basic procedures that apply to the M16-series rifle.

a. At the Halt, all movements are initiated from Order Arms or Sling Arms, which are the Positions of Attention with the rifle.

b. Al l precision movements are executed in quick-time cadence.

c. For drill purposes, the magazine is not carried in the rifle. When performing duty requiring the use of the magazine, the rifle is carried at Sling Arms.

d. Th e command Port, ARMS must be given before the command for Double Time.

e. Facings, alignments, and short-distance marching movements are executed from Order Arms or Sling Arms. When these movements are commanded while at Order Arms, automatically raise the rifle about 1 inch off the marching surface on the command of execution. When the movement has been completed, automatically return the rifle to Order Arms.

f. Facing movements are executed from Order Arms or Sling Arms. When a Facing is necessary to establish the direction of march, the facing movement is executed before the command for the manual of arms. After a marching movement has been completed, Order, ARMS or Sling, ARMS is commanded before the command for the facing movement.

g. Ready, Port, ARMS must be commanded following Inspection Arms and before any other movements can be commanded.

h. Port Arms is the key position assumed in most manual of arms movements from one position to another except Right Shoulder Arms from Order Arms and Order Arms from Right Shoulder Arms.

i. Manual of arms movements are a combination of the Position of Attention and the procedures for the prescribed movement. Most manual of arms movements are executed with the head, eyes, and body as in the Position of Attention.

j. Sling Arms is the appropriate position assumed to carry the rifle while marching in most situations. Port Arms is only used when slings are unavailable or unless specifically required by local conditions.

NOTES:

1. Paragraphs 5-2 through 5-10 refer to slings tight. However, all individual and unit drill movements may be executed with slings loose except when executing Fix and Unfix Bayonets.

2. Th e manual of arms movements for the M14, M1903/M1917, and M4 carbine are basically the same as for the M16. The movements for the

M14 are fully described in Appendix B; the movements for the

M1903/M1917 are fully described in Appendix C. The movements for the

M4 carbine are fully described in Appendix D.

Suspension Traverse

The suspension traverse is used to move personnel and equipment over rivers, ravines, and chasms, or up or down a vertical obstacle. By combining the transport-tightening system used during the rope bridge, an A Frame used for the vertical haul Line (Figure 9-24), and belay techniques device, units can make a suspension traverse (Figure 9-25 and Figure 9-26). Installing a suspension traverse can be slow and equipment intensive. Everyone must be well-trained and rehearsed in the procedures.
(1) Construction. The suspension traverse is constructed with static ropes. The max span that can be bridged is generally 75 percent length of the shortest rope. Planning considerations include those for rope bridge and vertical haul line.
(2) Equipment.
• Three static installation ropes.
• Seven sling ropes.
• Nine carabiners.
• One heavy duty double pulley.
• One locking carabiner.
• One canvas pad.